To Next PageTo Next Page
Need help?Do you have a question about the Cisco Line Card 4500 E-Series and is the answer not in the manual?
General| Product Type | Line Card |
|---|---|
| Port Speed | 10/100/1000 Mbps |
| Supported Interfaces | RJ-45 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Relative Humidity | 10 to 95% noncondensing |
Essential safety warnings applicable to the entire installation process.
Crucial grounding steps for safety and performance.
Guidelines for working safely with electrical components.
Measures to protect against ESD damage when handling components.
Breaks down the switch installation into a series of sequential tasks.
Instructions for physically mounting the switch in an equipment rack.
Connecting the chassis to a proper system ground for safety and performance.
Details procedures for removing and installing AC power supplies.
Details procedures for removing and installing DC power supplies.
Verifies the system successfully boots up after installation or startup.
Uses LEDs to diagnose issues during the switch's startup sequence.
Details steps to diagnose and resolve power supply problems.
Covers diagnosing and resolving supervisor engine problems.
Provides guidance on how to contact TAC for support.
Detailed specifications for the 1000W AC-input power supply.
Detailed specifications for the 1300W AC-input power supply.
Detailed specifications for the 1400W AC-input power supply.
