Cisco Line Card 4500 E-Series User Manual

A-15
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A Power Supply Specifications
1400 W DC-Input Power Supply
1400 W DC-Input Power Supply
The 1400 W DC-input power supply (PWR-C45-1400DC-P), shown in Figure A-4, is supported in the
following Catalyst 4500 E-series switches:
• Catalyst 4503-E
• Catalyst 4506-E
• Catalyst 4507R-E
• Catalyst 4510R-E
• Catalyst 4507R+E
• Catalyst 4510R+E
Caution Do not install the 1400 W DC power supply with any other power supply under any circumstances.
Doing so can seriously damage your switch.
Figure A-4 1400 W DC-Input Power Supply
The 1400W DC-input power supply can be used with the Catalyst 4500 Series AC Power Shelf
(PWR-P4502-1PSU). Documentation for the Catalyst 4500 Series AC Power Shelf is located at this url:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/configuration/notes/
78_15068.html
Israel CAB-S132-C19-ISRL 14 ft (4.3 m) 16 A, 250 VAC SI32
UPS 220 VAC CAB-C19-CBN 9 ft (2.74 m) 20 A, 250 VAC IEC-60320-C20
Table A-9 1400 W AC-Input Power Supply Power Cords (continued)
Locale Power Cord Part Number Length Cordset Rating AC Source Plug Type
130922
130923
231377

Cisco Line Card 4500 E-Series Specifications

General

Brand	Cisco
Model	Line Card 4500 E-Series
Category	Switch
Language	English