Cisco MDS 9132T User Manual

Installing the Shelf Bracket Kit into a Two-Post Telco Rack 23
Installing the Shelf Bracket Kit into a Four-Post EIA Rack 24
Preinstalling the Switch 25
Airflow Considerations 25
Connection Guidelines for AC-Powered Systems 25
Installation Guidelines 26
Unpacking and Inspecting the Switch 26
Installing the Switch 27
Installing the Switch on the Shelf Brackets (Optional) 27
Installing the Switch in a 4-Post Rack 28
Installing the Switch in a 2-Post Rack 31
Removing the Shelf Bracket Kit (Optional) 34
Grounding the Switch 35
Installing and Removing Components 36
Installing and Removing the Linecard Expansion Module 36
Installing the Linecard Expansion Module 36
Removing the Linecard Expansion Module 37
Installing and Removing Power Supplies 37
Installing Power Supplies 37
Removing Power Supplies 39
Installing and Removing Fan Modules 39
Installing a Fan Module 39
Removing a Fan Module 40
CHAPTER 5 Connecting the Cisco MDS 9132T Switch 43
Preparing for Network Connections 43
Connecting the Console Port 44
Connecting the Console Port to a PC 44
Connecting a Modem to a Console Port 45
45
Connecting the Management Port 46
Connecting to a Fibre Channel Port 46
Removing and Installing Cables into SFP Transceivers 47
Installing a Cable into an SFP Transceiver 47
Removing a Cable from an SFP Transceiver 48
Cisco MDS 9132T Fibre Channel Switch Hardware Installation Guide
iv
Contents

Cisco MDS 9132T Specifications

General

Brand	Cisco
Model	MDS 9132T
Category	Switch
Language	English