Cisco NCS 5500 Series

Example:
RP/0/RP0/CPU0:router(config-bgp-nbr-af)# route-policy pe-pe-vpn-in in
Specifies a routing policy for an inbound route. The policy can be used to filter routes or modify route attributes.
Step 14
route-policy route-policy-name out
Example:
RP/0/RP0/CPU0:router(config-bgp-nbr-af)# route-policy pe-pe-vpn-out out
Specifies a routing policy for an outbound route. The policy can be used to filter routes or modify route attributes.
Step 15
commit
Configure BGP as PE-CE Protocol
Perform this task to configure BGP on the PE and establish PE-CE communication using BGP.
BGP Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x
109
Implementing BGP
Configuring a VPN Routing and Forwarding Instance in BGP