Known via "bgp 100", distance 20, metric 0, external-reach-lc-only
Tag 101, type external
Installed Oct 13 05:28:46.750 for 00:01:08
Routing Descriptor Blocks
10.0.0.2, from 10.0.0.2, BGP external
Route metric is 0
No advertising protos.
*/Forwarding Information Base/*
Router#show cef 150.0.2.0/24 location 0/5/CPU0
150.0.2.0/24, version 1021523, external-reach-lc-only, internal 0x5000001 0x0 (ptr 0x88b012e8)
[1], 0x0 (0x8a0fd598), 0x0 (0x0)
Updated Oct 13 05:28:46.951
Prefix Len 24, traffic index 0, precedence n/a, priority 4
via 10.0.0.2/32, 5 dependencies, recursive, bgp-ext [flags 0x6020]
path-idx 0 NHID 0x0 [0x88a54968 0x0]
next hop 10.0.0.2/32 via 10.0.0.2/32
This command displays the count of routes programmed to the hardware.
Router#show controllers npu resources exttcamipv4 location 0/0/CPU0
HW Resource Information
Name : ext_tcam_ipv4
OOR Information
NPU-0
Estimated Max Entries : 2048000
Red Threshold : 1945600
Yellow Threshold : 1638400
OOR State : Green
NPU-1
Estimated Max Entries : 2048000
Red Threshold : 1945600
Yellow Threshold : 1638400
OOR State : Green
NPU-2
Estimated Max Entries : 2048000
Red Threshold : 1945600
Yellow Threshold : 1638400
OOR State : Green
NPU-3
Estimated Max Entries : 2048000
Red Threshold : 1945600
Yellow Threshold : 1638400
OOR State : Green
Current Usage
NPU-0
Total In-Use : 1018789 (49 %)
iproute : 1018789 (49 %) (Prefix Count: 1018789)
ipmcroute : 0 (0 %) (Prefix Count: 0)
NPU-1
Total In-Use : 1018789 (49 %)
iproute : 1018789 (49 %) (Prefix Count: 1018789)
ipmcroute : 0 (0 %) (Prefix Count: 0)
NPU-2
Total In-Use : 1018789 (49 %)
iproute : 1018789 (49 %) (Prefix Count: 1018789)
ipmcroute : 0 (0 %) (Prefix Count: 0)
NPU-3
Total In-Use : 1018789 (49 %)
iproute : 1018789 (49 %) (Prefix Count: 1018789)
ipmcroute : 0 (0 %) (Prefix Count: 0)
Information about Implementing BGP
To implement BGP, you need to understand the following concepts:
BGP Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x
117
Implementing BGP
Information about Implementing BGP