Cisco NCS 5500 Series

DETAILED STEPS
Step 1
configure
Step 2
router bgp as-number
Example:
RP/0/RP0/CPU0:router(config)# router bgp 120
Specifies the BGP AS number, and enters the BGP configuration mode, for configuring BGP routing processes.
Step 3
nsr disable
Example:
RP/0/RP0/CPU0:router(config-bgp)# nsr disable
Disables BGP Nonstop routing.
Step 4
commit
Disable BGP Nonstop Routing: Example
The following example shows how to disable BGP NSR:
configure
router bgp 120
no nsr
end
Re-enable BGP Nonstop Routing
If BGP Nonstop Routing (NSR) is disabled, use the following steps to turn BGP NSR back on using the
following steps:
SUMMARY STEPS
1.
configure
2.
router bgp as-number
3.
no nsr disable
4.
commit
DETAILED STEPS
Step 1
configure
Step 2
router bgp as-number
Example:
RP/0/RP0/CPU0:router(config)# router bgp 120
BGP Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x
67
Implementing BGP
BGP Nonstop Routing