Cisco Nexus
7018
Cisco Nexus
7010
Cisco Nexus
7009
Cisco Nexus
7004
Description
Sound power levels
74.2 dBA
78.9 dBA72.5 dBA83 dBAWithout air filter
—81.7 dBA——With air filter
Physical Specifications for the Cisco Nexus 7000 Series Chassis
The physical specifications differ for the Cisco Nexus 7000 Series chassis depending on the model that you
are installing and the type of installation you are doing (you can front mount all models but you can optionally
do a center mount of the Cisco Nexus 7004 and 7009 chassis). Table 10: Physical Specifications for Cisco
Nexus 7000 Series Chassis, on page 138 lists the physical specifications for each model and installation type.
Table 10: Physical Specifications for Cisco Nexus 7000 Series Chassis
Height
8
Rear Depth
7
Front Depth
6
Width
5
Chassis
12.25 inches (31.1 cm) (7 RU)24.0 inches (61.0 cm)7 inches (17.8 cm)17.3 inches (43.9 cm)Cisco Nexus 7004 (all mounts)
24.5 inches (62.2 cm) (14 RU)24.0 inches (61.0 cm)7 inches (17.8 cm)17.3 inches (43.9 cm)Cisco Nexus 7009 (front
mount)
24.5 inches (62.2 cm) (14 RU)18.0 inches (45.8 cm)13 inches (33.0 cm)17.3 inches (43.9 cm)Cisco Nexus 7009 (center
mount)
36.75 inches (93.3 cm) (21.0
RU)
33.1 inches (84.1 cm)7 inches (17.8 cm)17.3 inches (43.9 cm)Cisco Nexus 7010 (all mounts)
43.75 inches (111.1 cm) (25.0
RU)
33.1 inches (84.1 cm)7 inches (17.8 cm)17.3 inches (43.9 cm)Cisco Nexus 7018 (all mounts
5
Width is also the minimal clearance required between the two vertical mounting rails inside the rack or cabinet.
6
Front depth is also the minimal clearance required between the front mounting rails and the inside of the front of the rack or
cabinet. For all switches, this includes 7 inches (17.8 cm) of space for cabling. For the Cisco Nexus 7009 center-mounted
chassis, this distance also includes 6 inches of the chassis which is offset to the front by the center-mount bracket.
7
Rear depth is also the clearance required between the front-mounting rails and the inside of the rear of the rack or cabinet. For
front mounted switches, this is the same as the depth of the chassis. For a center-mounted Cisco Nexus 7009 switch, this is 6
inches (15.2 cm) less than the depth of the chassis, which is offset to the front.
8
Height is also the clearance required between the top of the bottom support bracket and the top of the chassis that you are
installing. If you are installing another chassis above this chassis, its bottom-support brackets must be positioned above this
clearance area.
The weights and quantities are listed in the following tables:
• Cisco Nexus 7004 switch (see Table 11: Weights and Quantities for the Cisco Nexus 7004 Switch
Components , on page 139)
• Cisco Nexus 7009 switch (see Table 12: Weights and Quantities for the Cisco Nexus 7009 Switch
Components , on page 141)
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
138
Technical Specifications
Physical Specifications for the Cisco Nexus 7000 Series Chassis
To Next Page
Loading...
