CHAPTER 9
Accessory Kits Contents
This appendix describes the contents of the Cisco Nexus 7000 Series accessory kits.
This appendix includes the following sections:
• Cisco Nexus 7004 Switch Accessory Kit, on page 231
• Cisco Nexus 7009 Switch Accessory and Optional Kits, on page 234
• Cisco Nexus 7010 Switch Accessory Kits, on page 238
• Cisco Nexus 7018 Switch Accessory Kits, on page 240
Cisco Nexus 7004 Switch Accessory Kit
This section describes the contents of the accessory kit that you can order for the Cisco Nexus 7004 switch.
The accessory kit is shipped with each Cisco Nexus 7004 chassis. You use that kit for mounting the chassis
on a four-post or two-post rack. Typically, you mount the front of the chassis using the front-mount brackets,
which are already attached to the chassis, but if you need to mount the center of the chassis, you use the
center-mount brackets (order part number N7K-C7004-RMK), which you must order separately. The kit also
includes the screws, grounding lug, and other equipment that you use for all installations of this chassis.
Table 56: Cisco Nexus 7004 Switch Accessory Kit Contents , on page 231 lists and illustrates the contents for
this kit.
.
Table 56: Cisco Nexus 7004 Switch Accessory Kit Contents
QuantityDescriptionIllustration
10
10
Chassis mounting screws
• 12-24 x 3/4-in. Phillips screws
• M6 x 19 mm Phillips screws
1RJ-45 rollover cable
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
231
To Next Page
Loading...
