Cisco Nexus 7004 - Page 244

QuantityDescriptionIllustration
1D B9F/RJ-45F PC terminal
1 kit
1 per kit
2 per kit
Ground lug kit (includes the following parts):
• Two-hole lug
• M4 x 8-mm Phillips pan-head screws
1 kit (3 pieces)Cable ties, 8.5 inches
1ESD wrist strap (disposable)
1Hazardous substances list for customers in ChinaNot applicable
1
1
Cisco Information Packet
1-Year Limited Warranty for Hardware
Not applicable
1GR-1089 Installation and Caution InstructionsNot applicable
If you do not receive a part listed in this document, contact Cisco Technical Support at this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml. If you purchased this product through a
Cisco reseller, you might receive additional contents in your kit, such as documentation, hardware, and power
cables.
Note
The product shipment includes power cords for the following power supplies:
• 3-kW AC power supplies—one power cord per power supply
• 3-kW DC power supplies—no power cords supplied (you must supply a cable for 6 AWG and up to 45
A).
The shipped cables depend on your specification when placing a Cisco Nexus 7000 Series device order.
The available power cords for the 3-kW AC power supplies are as follows:
• CAB-AC-16A-AUS—power cord, 250-VAC 16A, C19, Australia
• CAB-AC16A-CH—power cord, 16-A, China
• CAB-AC-2500W-EU—power cord, 250-VAC 16A, Europe
• CAB-AC-2500W-INT—power cord, 250-VAC 16A, International
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
232
Accessory Kits Contents
Cisco Nexus 7004 Switch Accessory Kit