Table 66: NAM-NX1 LEDs
ConditionColorLED
The NAM is operational.GreenSTATUS
Indicates one of the following conditions:
• The module is booting up and running diagnostic tests.
• The module is disabled and not in service.
• The module is shutting down or coming up.
Orange
Indicates one of the following conditions:
• The module is booting up and running diagnostic tests.
• The module is disabled and not in service.
The module is shutting down or coming up.
Red
The module is powered off.Off
Identifies the module.
BlueID
The module is not being identified.Off
The port is active (link is connected).
GreenSync Link Status
The port is not active (link is not connected)Off
The port is active (link is connected).GreenSAS Link Status
LED
The port is disabled by the operator or is not initializing.Orange
The port is faulty and disabled.Flashing orange
The port is not active or the link is not connected.Off
Fabric Module LEDs
Table 67: Fabric Module LEDs , on page 249 describes the fabric module LEDs.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
248
Chassis and Module LEDs
Fabric Module LEDs