Cisco Nexus 7004 - 10 BASE-X SFP+ Transceivers

• F3 Series 48-port 1- and 10-Gigabit I/O module (N7K-F348XP-25)
• M1 Series 32-port 10-Gigabit Ethernet I/O module (N7K-M132XP-12)
• M1 Series 32-port 10-Gigabit Ethernet I/O module with XL option (N7K-M132XP-12L)
• M2 Series 24-port 10-Gigabit Ethernet I/O module with XL option (N7K-M224XP-23L)
Starting with Cisco NX-OS Release 8.1(1), the 10-Gigabit Fabric Extender Transceiver (FET) can be used
with M3 Series 48-port 1- and 10-Gigabit Ethernet I/O modules with XL option(N7K-M348XP-25L) when
connecting them to the Cisco Nexus 2248TP, 2248TP-E, 2232PP, 2232TM, and 2224TP Fabric Extenders
(FEXs).
You can also use the SFP-10G-SR and SFP-10G-LR transceivers when connecting the 32-port 10-Gigabit
Ethernet I/O modules to FEXs.
This section includes the following sections:
10BASE-X SFP+ Transceivers
To see which SFP+ transceivers are used with the F1 or F2 Series I/O modules, see Transceivers and Module
Connectors, on page 205. To see which SFP+ transceivers are used with the M1, M2 and M3 Series I/O
modules, see Table 45: SFP+ Transceivers Used with M1, M2 and M3 Series Modules, on page 215. To see
information on the DWDM SFP+ transceivers, see the 10BASE-DWDM SFP+ Transceivers, on page 218.
Table 44: SFP+ Transceivers Used with F1, F2 and F3 Series I/O Modules
I/O ModuleTransceiver
48-port 1- and 10-Gigabit
(N7K-F348XP-25)
48-port 1- and
10-Gigabit(N7K-F248XP-25 and
N7K-F248XP-25E)
32-port 1- and10-Gigabit
(N7K-F132XP-15)
XXXDWDM-SFP10G-xx.xx
X 1X 1FET-10G
XXXSFP-10G-ER
XXX
17
SFP-10G-LR
XXXSFP-10G-LRM
XXXSFP-10G-SR
XXXSFP-10G-ZR
X
X
XXSFP-H10GB-CU1M
XXXSFP-H10GB-CU3M
XXXSFP-H10GB-CU5M
XXXSFP-H10GB-ACU7M
XXXSFP-H10GB-ACU10M
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
214
Transceivers and Module Connectors
10BASE-X SFP+ Transceivers