Cisco Nexus 7004 - Power Supply Cable Specifications

Full Redundancy
Mode
Input Source
Redundancy Mode
Power Supply
Redundancy Mode
Combined ModePower Inputs
—
—
—
—
—
—
—
—
—
3,000 W
6,000 W
9,000 W
3,000 W
6,000 W
9,000 W
12,000 W
Single input per
power supply
1 power supply
2 power supplies 1
3 power supplies 1
4 power supplies
15
15
The Cisco Nexus 7018 switch uses up to four 6-kW power supplies, the Cisco Nexus 7010 switch uses
up to three 6-kW power supplies, and the Cisco Nexus 7009 uses up to two 6-kW power supplies.
Power Supply Cable Specifications
For power supply cable specifications, see the following tables:
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a non-compatible power cord with this product may result in electrical
safety hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered
with the system.
Note
Table 26: 3-kW and 6-kW AC Power Supply Power Cords
Power Cord
Reference
Illustration
Cord Set RatingPower Cord Part NumberLocale
16A, 250 VACCAB-AC-16A-AUSAustralia and New Zealand
16A, 250 VACCAB-AC-16A-CHPeoples Republic of China
16A, 250 VACCAB-AC-2500W-EUContinental Europe
16A, 250 VACCAB-AC-2500W-INTInternational
16A, 250 VACCAB-AC-2500W-ISRLIsrael
16A, 250 VACCAB-9K16A-US1Japan and North America (non locking)
200-240 VAC operation
16A, 250 VACCAB-AC-C6K-TWLKJapan and North America (locking) 200-240
VAC operation
16A, 250 VACCAB-7513ACJapan and North America 100-120 VAC
operation
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
162
Technical Specifications
Power Supply Cable Specifications