Table 57: Cisco Nexus 7009 Switch Accessory Kit Contents
QuantityDescriptionIllustration
1 kitFront-mount Bottom-Support Kit (available separately as
N7K-C7009-BSK) includes the following parts:
2 per kit• Front-mount bottom support rails
1 per kit• Crossbar
20 per kit• 12-24 x 3/4-in. Phillips screws
20 per kit• M6 x 19-mm Phillips screws
2 per kit• M4 x 8-mm Phillips screws
This accessory kit does not include the center-mount
bottom-support kit (part number N7K-C7009-CMK). If you
ordered that kit, it is included separately with the switch
shipment.
Note
1
RJ-45 rollover cable
1D B9F/RJ-45F PC terminal
1 kit
1 per kit
2 per kit
Ground lug kit (includes the following parts):
• Two-hole lug
• M4 x 8-mm Phillips pan-head screws
1 kit (7 pieces)Cable ties, 8.5 inches
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
235
Accessory Kits Contents
Cisco Nexus 7009 Accessory Kit
To Next Page
Loading...
