23
——
CL-E321X***BC (model with cutter)
1. External media feed port
This port is used to feed media into the printer.
2. Power switch
Turns the printer power supply on and off.
3. DC jack
Connects to the included AC adapter.
4. D-SUB 9pin serial interface
5. Ethernet Interface
6. USB interface
7. AC port
8. Ethernet panel button
This button prints and initializes network settings.
CAUTION
Do not connect a USB cable to the Ethernet interface. Doing so may damage connectors/inter-
faces.
To Next Page
Loading...
