Citizen CL-E321

81
——
8. Online Conguration Mode
1. Press and hold the FEED key for at least 3 seconds while the printer is online and not
receiving data.
The printer is now in online conguration mode.
The buzzer emits 3 short tones and the status LED ashes alternately in green and red.
2. Press the FEED key to select media sensor mode.
Media sensor mode Buzzer Status LED
Color Interval
Transmissive sensor mode 1 short tones Green Flashes
Press the FEED key ↓
Reective sensor mode 2 short tones Green Flashes quickly
Press the FEED key ↓
Continuous media mode 3 short tones Amber Flashes
Press the FEED key ↓
Thermal-transfer printing
mode
4 short tones Amber Flashes quickly
Press the FEED key ↓
Direct-thermal printing
mode
5 short tones Red Flashes
Press the FEED key ↓
Returns to the transmissive sensor mode.
3. Press and hold the FEED key for at least 3 seconds.
4. Release the FEED key once the buzzer emits a long tone.
The selected media sensor mode is set.
 To cancel online conguration mode, continue pressing and holding the FEED key for
at least 3 seconds without releasing your nger at step 4.
The buzzer emits 4 short tones, and the printer restarts.