Citizen CL-E321 User Manual

82
——
9. Clearing Jobs Stored in the Printer
Jobs stored in the printer can be cleared when the printer is paused.
1. Press the FEED key if the printer is printing or receiving data.
The printer is now paused.
2. Press and hold the FEED key for at least 3 seconds.
The buzzer emits 1 short tone.
3. Release the FEED key.
One job has been cleared.
Alternatively, continue to press and hold the FEED key for at least 3 second without releasing
your nger until the buzzer emits 2 short tones.
4. Release the FEED key once the buzzer emits 2 short tones.
All jobs have been cleared.

Citizen CL-E321 Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Power Supply	100-240V AC, 50/60 Hz
Max Print Width	4.1 inches (104 mm)
Media Sensor	Transmissive and reflective sensor
Interface	USB, Serial (RS-232)
Media Width	1.97 to 4.33 inches (50 to 110 mm)
Supported Barcode Types	Code 39, Code 128, ITF, Codabar, UPC-A, UPC-E, EAN-8, EAN-13, POSTNET
Supported Media Types	Continuous, Die-cut
Media Thickness	0.0635 – 0.254 mm (2.5 - 10 mil)
Print Speed	Up to 8 inches per second