Citizen CL-E321 User Manual

90
——
Control Languages
Supports the Datamax® language and Zebra® language
Digital Processing Components
Item Description
CPU 32-bit RISC CPU (max. operation frequency of 216 MHz)
ROM 16 MBytes of ash ROM (user area: 4 MBytes)
RAM 32 MBytes of SDRAM (user area: 4 MBytes)
Media detection sensors
Item Description
Transmissive sensor Detects label gaps, tag notches, and out of media state
Reective sensor Detects black lines on back of media and out of media state
Ribbon encoder sensor Ink ribbon end detection
Communication interfaces
Item Description
USB Full-speed USB 2.0 (12 Mbps), Type B connector
Ethernet 100BASE-TX / 10BASE-T, RJ45 connector
Serial RS232C, 9-pin D-SUB female connector
Baud rates: 2400, 4800, 9600, 19200, 38400, 57600, and 115200 bps
Indicators and switches
Item Description
LED Power on (green), status/errors/alarms (green, red, and amber)
Buzzer Alarms, warnings, and other indications
Operation keys 1 (Performs feed and other operations)
Head-up detection switch Detects head-up states
Ethernet panel button Prints and initializes Ethernet settings
Power switch Turning the Power On/Off

Citizen CL-E321 Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Power Supply	100-240V AC, 50/60 Hz
Max Print Width	4.1 inches (104 mm)
Media Sensor	Transmissive and reflective sensor
Interface	USB, Serial (RS-232)
Media Width	1.97 to 4.33 inches (50 to 110 mm)
Supported Barcode Types	Code 39, Code 128, ITF, Codabar, UPC-A, UPC-E, EAN-8, EAN-13, POSTNET
Supported Media Types	Continuous, Die-cut
Media Thickness	0.0635 – 0.254 mm (2.5 - 10 mil)
Print Speed	Up to 8 inches per second