Citizen CL-E321 User Manual

71
——
Mode Buzzer Status LED
Color Interval
Emulation switching mode 4 short tones Amber Flashes quickly
Press the FEED key ↓
HEX dump mode 5 short tones Red Flashes
Press the FEED key ↓
Initialization mode 6 short tones Red Flashes quickly
Press the FEED key ↓
Returns to the sensor adjustment mode.
3. Once the desired operation mode has been selected, press and hold the FEED key for
at least 3 seconds.
4. Release the FEED key once the buzzer emits a long tone.
The printer is now in the desired operation mode.
5. After nishing use of operation modes, press and hold the FEED for at least 3 seconds
to return to the normal startup mode.
After you have nished conguring each mode, restart the printer.
 To return to the normal startup mode without selecting an operation mode after chang-
ing to the special function mode, press and hold the FEED key for at least 3 seconds.
 If you continue to press and hold the FEED key for at least 3 seconds after the buzzer
emits a long tone, the buzzer will emit 4 short tones, and then printer restarts.
 The printer restarts, and changes to normal mode.

Citizen CL-E321 Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Power Supply	100-240V AC, 50/60 Hz
Max Print Width	4.1 inches (104 mm)
Media Sensor	Transmissive and reflective sensor
Interface	USB, Serial (RS-232)
Media Width	1.97 to 4.33 inches (50 to 110 mm)
Supported Barcode Types	Code 39, Code 128, ITF, Codabar, UPC-A, UPC-E, EAN-8, EAN-13, POSTNET
Supported Media Types	Continuous, Die-cut
Media Thickness	0.0635 – 0.254 mm (2.5 - 10 mil)
Print Speed	Up to 8 inches per second