- 44 -
− Move into ,,START” and press RIGHT ARROW
− The balance is ready for weighing in selected ranges
Draw. 39. Checkweighing – display view
1 – result
2 – stable measurement
3 – function name
4 – value of upper range
5 – value of down range
6 – graphic interpretation which defines range of weighing with measured load (LO –
OK.- HI)
7– name of the product recorded in range base
8 – difference between result and the ranges
9 – graphic view which place weighed mass is
10 – used load of the balance.
Selecting other product from stage base
− Press SETUP during checkweighing
− Display shows dialogue windows ,move to range base and select other product or
enter other values for up and down range (if you use range base)
17.3. Dosage
Durin
g dosage (pouring) load mass is filled up till the settled mass is reached. Before the
procedure set the standard mass which is upper stage of the dosage.
To Next Page
Loading...
