- 75 -
22. WEIGHING LOADS UNDER THE BALANCE
In standard v
ersion balances have possible to weight loads under the CX balance. To use
this function:
Draw. 70. Weighing under analytical balances –location
Remove the cover in the base of the balance. There is a hook visible which can be used to
suspend a sample.
Hang the load on the look in the hole under the balance (the hook is a part of standard
equipment).
Note:
1. The suspension eye is directly connected to the weighing mechanism. Take great
care not to move or rotate the eye, as this will damage the weighing mechanism.
2. The mass of all suspended accessories should be set to zero by pressing TARE
before commencing any weighing.
To Next Page
Loading...
