Citizen CX 165 - Connecting Additional Keys; List of Communications Computer-Balance

- 76 -
23. CONNECTING ADDITIONAL KEYS
It is possible to connect external tare and print buttons by special luster through port
RS232.
Printer or computer can be connected to the cluster.
Connected elements are not standard accessories of the balance.
1. balance
2. cable which connects balance with cluster
3. cluster
4. button TARA
5. button PRINT
24. LIST OF COMMUNICATIONS COMPUTER-BALANCE
Function
INTERFACE RESET
Command R CR LF (zero actual orders, restore factory setting)
Function SEND ALL COMMANDS FROM THE BALANCE
Command PC CR LF (all recorded information in commands in the balance programme
are sent from the balance)
Function SEND THE RESULT IN BASIC UNIT
Command S CR LF (result is sent from the balance in basic interval after stability)
Function SEND RESULT IN BASIC UNIT IMMEDIATELY
Command SI CR LF
Function SEND THE RESULT IN ACTUAL INTERVAL
Command SU CR LF (result in actual unit is sent from the balance after stability)
Function SEND RESULT IN ACTUAL INTERVAL IMMEDIATELY
Command SUI CR LF
Function ZERO THE BALANCE
Command Z CR LF (set the balance to zero after it reaches stability
Function ZERO IMMEDIATELY
Command ZI CR LF
Function TARE WHEN STABLE
Command T CR LF
Function TARE THE BALANCE IMMEDIATELY
Command TI CR LF