Service Manual-CA60 30 Solution System 47
Troubleshooting
Small amount of solution or no
solution reaches the brush
The solution filter is clogged/dirt
Solenoid valve faulty or electrical
connection broken
Replace the solenoid valve or repair the
electrical connection
There is dust/debris in the tank or in the
detergent hoses, obstructing the solution
flo
The solution reaches the brush also
when the machine is off
There is dirt or calcium deposit on the
solenoid valve gaskets (EV1)
Replace the solenoid valve
The solenoid valve is faulty
Replace the solenoid valve
To Next Page
Loading...
