Clarke CA60 20D - Brush Deck Disassembly;Assembly

Service Manual-CA60 34 Scrub System DISC(CA60 20D/20TD) 55
Brush Deck Disassembly/Assembly
Disassembly
1. Drain the recovery tank.
2. Drain the clean water tank.
3. Remove the brush.
4. Remove the squeegee.
5. Remove the machine’s batteries.
6. Position a flattened cardboard box the same size as the machine’s side. With the assistance of a
second person, turn the machine over sideways and rest its right-hand side on the box positioned on
the floor.
7. Remove the screws (A) and remove the splash guard (B).
8. Loosen the clamp (C) and disconnect the water hose (D) from the brush deck.
A
B
D
A
C D
Figure 6