Clear-Com TEMPEST 2400 - Page 40

34 Tempest®2400 2-Channel Wireless Intercom System
Adjusng Network Number and Lockout Key
The Network Number and Lockout Key sengs can be adjusted from the BaseStaon, under the “Radio Conguraon”
secon of the Tech Menu. Any adjustment to the Network Number and/or Lockout Key will require corresponding
BeltStaons to be re-paired with updated BaseStaon.
• Press MENU and select “BaseStaon Sengs.”
• Using the Volume control, scroll to and select “Tech Menu.” Proceed through warning.
• Select “Radio Conguraon,” then “Network Number.”
• Use the Volume control to adjust the value and press ENT to save.
• Press MENU to escape one level and select “Lockout Key” to adjust the Lockout Key.
• Use the Volume control to adjust the value and press ENT to save.
• Press MENU repeatedly to escape to the Operaon screen.
Updang Network Numbers and/or Lockout Keys will require corresponding BeltStaons to be
re-paired to the updated BaseStaon.