Clear-Com TEMPEST 2400 - Beltstation Specifications; Remote Transceiver Specifications

83 Tempest®2400 2-Channel Wireless Intercom System
BeltStaon Specicaons
Intercom Audio Channels 2
Simultaneous Listen Paths True Dual Listen
Headset Connector 4 pin male
Microphone Type Dynamic or Electret, auto selected
LCD Display 102 x 80 pixels
Antenna Internal +2 dBi patch
Charger Input 100 240V, 0.3A, 50 60Hz,
Output 5V, 1.25A
Baery Charging Via supplied charger
Baery Life, Rechargeable Lithium-Polymer Up to 9+ hours
Charge me for Lithium Polymer baery 2¾ hours in the BeltStaon or 2½ hours in
the 5 bay charger (from empty)
Oponal Power 3 Standard AA alkaline cells
Baery Life, Alkaline baeries Approximately 4 Hours
Dimensions (inches) H 6.1” x W 4.0” x D 1.75”
Weight (with Lithium-Polymer baery) 14.3 oz
Operang Environment -20° to 50° C (-4° to 122° F) 10% to
90% Humidity
Remote Transceiver Specicaons
Maximum Distance, Base to Transceiver 1,500  (457.2 m), powered from the BaseStaon
Connecon to BaseStaon CAT-5 standard wiring
BaseStaons Supported per Transceiver 1
Number of Antenna Ports per Transceiver 2
Antenna Connector Type RP TNC
Supplied Antenna Whip antenna (2)
Dimensions with Antennas (inches) H 12” x W 3.7” x D 1.7”
Weight 11 oz
Operang Environment -20° to 50° C (-4° to 122° F); 10% to 90% Humidity