Clear-Com TEMPEST 2400 - Beltstation Menu; Wireless ISO

49 Tempest®2400 2-Channel Wireless Intercom System
Wireless ISO
Wireless ISO (isolate), somemes referred to as wireless talk-around is a wireless-only intercom feature that allows
communicaon among wireless BeltStaons only. When a wired intercom system is connected, Wireless ISO communicates
through the wireless poron of the system only. The BaseStaon front panel headset does not receive ISO audio.
Wireless ISO is enabled by default and is available only on channel A. It is acvated by pressing and holding ENTER. ENTER
enables the headset mic regardless of the “TALK A” buon.
Wireless ISO only operates in Operaonal mode. It does not operate in Menu mode.
BeltStaon Menu