ClearView Hawk Series - Default

56
Figure 5-24
In Figure 5-24X, click modify button after channel. You can see an interface is shown as in Figure
5-25. Please note all your modification here applies to local end only. You need to refresh web or
client-end to get the latest channel name. System max support 25-digital character.
Figure 5-25
In tour mode, you can see the following interface. On the right corner, right click mouse or click
shift button, you can control the tour. There are two icons:
stands for enabling window switch
and
stands for enabling window function. See Figure 5-26.
5.3.8 Default
Figure 5-26
Click default icon, system pops up a dialogue box. You can highlight to restore default factory
setup. See Figure 5-27.
• Select all
• General