ClimateMaster TCH072 - Blower Performance Data - TCV240 Standard Unit (Continued)

THE SMART SOLUTION FOR ENERGY EFFICIENCY
Tranquility
®
Compact Belt Drive (TCH/V) Series
Rev.: July 25, 2017
65
climatemaster.com
Blower Performance Data – TCV240 Standard Unit
A = Standard Static/Standard Motor, B = Low Static/Standard Motor, C = High Static/Standard Motor, D = Standard Static/Large Motor, E = High Static/Large Motor
Unit factory shipped with standard static sheave and drive at 2.5 turns open. Other speed require fi eld selection.
For applications requiring higher static pressures, contact your local representative. Performance data does not include drive losses and is based on sea level conditions.
Do not operate in black regions. All airfl ow is rated at lowest Voltage if unit is dual Voltage rated, i.e. 208V for 208-230V units.
All Data is Wet Coil
Table Continued from Previous Page
7800
BHP 2.98 3.13 3.25 3.39 3.54 3.68 3.83 3.99 4.15 4.34 4.50 4.66 4.82 4.95 5.11 5.27
Sheave/Mtr B B AAAAAAAC CCCCEE
RPM 830 860 885 915 945 975 1005 1030 1055 1085 1110 1135 1160 1180 1205 1230
Turns Open 4 3.5 6 5 4.5 3.5 3 2.5 1.5 0 3.5 3 2.5 2 1.5 1
8000
BHP 3.18 3.30 3.44 3.61 3.78 3.94 4.10 4.29 4.45 4.61 4.77 4.93 5.09 5.25 5.38 5.54
Sheave/Mtr B B AAAAAAACCCEEEE
RPM 850 875 900 930 960 990 1015 1045 1070 1095 1120 1145 1170 1195 1215 1240
Turns Open 4 3.5 5.5 4.5 4 3.5 2.5 2 1.5 4 3.5 3 2.5 2 1.5 1
8200
BHP 3.35 3.48 3.65 3.79 3.96 4.13 4.27 4.44 4.58 4.72 4.88 5.08 5.24 5.44 5.64
Sheave/Mtr B AAAAAAAACCEEEE
RPM 865 890 920 945 975 1005 1030 1060 1085 1110 1135 1160 1180 1205 1230
7000 3.5 5.5 5 4.5 3.5 3 2.5 1.5 1 3.5 3 2.5 2 1.5 1
8400
BHP 3.62 3.74 3.89 4.03 4.18 4.33 4.49 4.65 4.81 4.97 5.16 5.36 5.56 5.72 5.92
Sheave/Mtr AAAAAAAACCEEEEE
RPM 880 905 935 965 995 1020 1045 1070 1095 1120 1145 1170 1195 1215 1240
Turns Open 6 5.5 4.5 4 3 2.5 2 1.5 4 3.5 3 2.5 2 1.5 1
8600
BHP 3.81 3.98 4.12 4.29 4.46 4.62 4.78 4.94 5.10 5.28 5.48 5.64 5.84 6.04 6.20
Sheave/Mtr AAAAAAAAEEEEEEE
RPM 895 925 950 980 1010 1035 1060 1085 1110 1135 1160 1180 1205 1230 1250
Turns Open 5.5 5 4 3.5 3 2 1.5 1 3.5 3 2.5 2 1.5 1.5 1
8800
BHP 4.06 4.22 4.41 4.57 4.73 4.92 5.08 5.24 5.40 5.60 5.76 5.96 6.16 6.32
Sheave/Mtr AAAAAADEEEEEEE
RPM 915 940 970 995 1020 1050 1075 1100 1125 1150 1170 1195 1220 1240
Turns Open 5 4.5 3.5 3 2.5 1.5 1 4 3 3 2.5 2 1.5 1
9000
BHP 4.38 4.54 4.70 4.86 5.02 5.18 5.34 5.50 5.68 5.88 6.08 6.24 6.44 6.60
Sheave/Mtr AAAADDDEEEEEEE
RPM 935 960 985 1010 1035 1060 1085 1110 1135 1160 1185 1205 1230 1250
Turns Open 4.5 4 3.5 3 2 1.5 1 3.5 3 2.5 2 1.5 1 1
9200
BHP 4.65 4.76 4.90 5.08 5.26 5.44 5.62 5.80 6.00 6.16 6.36 6.56 6.72
Sheave/Mtr A A ADDDEEEEEEE
RPM 955 975 1000 1025 1050 1075 1100 1125 1150 1170 1195 1220 1240
Turns Open 4 3.5 3 2.5 1.5 1 4 3.5 2.5 2.5 2 1.5 1
9400
BHP 4.83 4.94 5.12 5.32 5.52 5.72 5.92 6.12 6.32 6.48 6.68 6.88
Sheave/Mtr A ADDDDEEEEEE
RPM 970 990 1015 1040 1065 1090 1115 1140 1165 1185 1210 1235
Turns Open 3.5 3.5 2.5 2 1.5 1 3.5 3 2.5 2 1.5 1
9600
BHP 5.10 5.24 5.44 5.64 5.84 6.04 6.24 6.40 6.60 6.80 6.96 7.16
Sheave/Mtr DDDDDEEEEEEE
RPM 985 1005 1030 1055 1080 1105 1130 1150 1175 1200 1220 1245
Turns Open 3.5 3 2 1.5 1 4 3.5 3 2.5 2 1.5 1
SCFM ESP 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50