1. INTRODUCING YOUR DAYMARK 9700
To avoid a fire hazard, occasionally disconnect the power cord from the printer and the
power supply and use soft dry cloth to clean the cord connectors and the connection
points. Leaving the cord plugged in and not cleaned for a long period, especially in an
area subject to dust oil and high humidity, could cause the insulation materials to deterio-
rate.
Never clean the printer with water or any flammable liquid (alcohol, benzene, thinner, etc.)
either applied directly or with a cloth. If you accidentally spill liquid on the printer, switch
the printer off immediately, disconnect the power plug from the power source and call for
service.
Use only a slightly damp cloth, thoroughly wrung out, to clean the printer surfaces. Never
use alcohol, thinner or any other flammable liquids or risk having them come into contact
with electrical components inside the printer.
PRINTER HOUSING CLEANING INSTRUCTIONS
1. INTRODUCING YOUR DAYMARK 9700
9.
To Next Page
Loading...
Need help?
General