26
Set the CC #.
B u t t o n - F 1 4 - 3
1 2 7 / O f f ← →
Set the value range: The first value is the data sent when button pressed; the
second value is the data sent when button released. Off means sending no
data.
B u t t o n - F 1 4 - 4
P o r t : 1 C H : 0 0 ←
Set the MIDI port and channel.
If the type on page 4-1 is set to “Note”:
B u t t o n - F 1 4 - 1
T y p e : N o t e →
The next page will be:
B u t t o n - F 1 4 - 2
0 6 0 - C 4 ← →
Set the note #.
B u t t o n - F 1 4 - 3
1 2 7 / 0 0 0 ← →
Set the note velocity: The first value is the note on velocity; the second value is
the note off velocity.
B u T t o n - F 1 4 - 4
P o R t : 1 C H : 0 0 ←
Set the MIDI port and channel.
If the type on page 4-1 is set to “Program”:
B u t t o n - F 1 4 - 1
T y p e : P r o g r a m →
The next page will be:
B u t t o n - F 1 4 - 2
0 0 1 - P i a n o ← →
Set the program # (voice #).
B u t t o n - F 1 4 - 3
M : 00 0 L : 000 ← →
Set the bank MSB and LSB.
B u t t o n - F 1 4 - 4
P o r t : 1 C H : 0 0 ← →
Set the MIDI port and channel.
z SEQ buttons:
S e q - R T Z 4 - 5
T y p e : C o n t r o l ← →
Select one of the 6 buttons(RTZ,REW,FF,REC,STOP,PLAY)
Set the type: control or note.
If type is “Control”, the next page will be:
S e q - R T Z 4 - 6
0 1 6 - G e n e r a l ← →
Set the CC #.
S e q - R T Z 4 - 7
1 2 7 / O f f ← →
Set the value range: The first value is the data sent when button pressed; the
second value is the data sent when button released. Off means sending no
data.
S e q - R T Z 4 - 8
To Next Page
Loading...
Need help?
General
