91
Units
1 Select Units and press the Enter button
to open the corresponding menu.
The currently active unit is indicated by a
green dot on the right.
2 Use the up/down arrows button
to select your preferred unit. The newly
selected unit is highlighted (blue).
3 Press the Enter button
to conrm the
selection, which is now indicated by the
green dot.
4 Press the Enter button
again to save the
selected unit.
A target range can only be set and used if
the unit is set to INR.
Settings
Beeper Volume
Set Targets
Result Format
Language
Units
Time & Date
Units
INR
%Q
Sec
Save
Reminders and Meter Settings
CoaguChek INRange User’s Manual
To Next Page
Loading...
