92
Result Format
Choose Detailed if you want to see your cur-
rent result compared with your previous result
on the same screen. An up arrow indicates
that your current result is higher, and a down
arrow indicates that it is lower than your
previous result (see page 53).
1 Select Result Format and press the Enter
button
to open the corresponding
menu.
The currently active result format is indicated
by a green dot on the right.
2 Use the up/down arrows button
to se-
lect your preferred result format. The newly
selected format is highlighted (blue).
3 Press the Enter button
to conrm the
selection, which is now indicated by the
green dot.
4 Press the Enter button
again to save the
selected result format.
Settings
Beeper Volume
Set Targets
Result Format
Language
Units
Time & Date
Result Format
Simple
Detailed
Save
Reminders and Meter Settings
CoaguChek INRange User’s Manual
To Next Page
Loading...
