Recommended cables
4-38 Chapter 4: Installation 98-158751-C
4.4.3 Recommended power cables
The cable types must meet the following standards:
• M27500 for shielded wire.
• M22759 for single wire.
AC Power:
Single unshielded wire 18 AWG (Hot) & 12 AWG (Cold)
Manufacturer: Carlisle (Thermax) MIL-DTL-22759/86-18
Manufacturer: Carlisle (Thermax) MIL-DTL-22759/86-12
4.4.4 Recommended RF cables
Recommended cables for AVIATOR 700S must be compliant with ARINC Characteristic
781-7 [3].
4.4.5 Recommended cables for ARINC 429
The cables for the ARINC 429 interfaces must be twisted and shielded. They must
conform to the standards for aeronautical use. Use a cable that meets the following
standard:
• M27500 for shielded wire
The cables for the ARINC 429 interfaces must be twisted and shielded and conform to the
standards for aeronautical use.
ARINC-429 Data Bus Cable 2 Conductor 24AWG shielded
Manufacturer: Carlisle (ECS) P/N 522402
4.4.6 Recommended cables for Ethernet
Use an Ethernet cable that meets one of the following standards:
• TIA/EIA568-A CAT5 Requirements
• FAR 25.869(a)
The following cable types meet the requirements:
100ohm +-10%, 13pF/ft, 24 AWG shielded
Manufacturer: Carlisle (Tensolite) P/N NF24Q100-01 100Base-T Ethernet Cable
4.4.7 Recommended cables for discrete signals
Use cables for discrete wiring that meet the following standard:
• M27500 for shielded wire
2 Conductor Cable 22 AWG shielded
Manufacturer: Carlisle (Thermax) M27500-22 WJ 2 S 24
To Next Page
Loading...
