COBHAM EXPLORER 540 - Page 141

Appendix B: Command reference
98-148232-E AT commands 133
M2M related AT commands
The following tables summarize some of the most used AT commands for M2M operation.
Parameters are explained in Parameters for ATCO commands on page 133 and Parameters
for other M2M related AT commands on page 137.
ATCO commands
The table below summarizes the ATCO commands, i.e. AT commands that can be used in the
SMS command ATCO.
Parameters for ATCO commands
Note
SMS commands always use the BGAN network, regardless of the selected connection
mode (Cellular or BGAN).
Command Parameters
_IATCROBST
a
a. Robustness for 3GPP LTE signals, not ATC
<enable>
_ICPWD
<type>,<old passwd>,<new passwd>
_IGETFILE
<ftp dir>,<filename>,<local dir>,<ftp server>,<ftp uname>,<ftp passwd>[,<apn>[,<apn
uname>[,<apn passwd>]]]
_IGETFW
<mode>[,<ftp server>[,<ftp uname>[,<ftp passwd>[,<apn>[,<apn uname>[,<apn passwd>]]]]]]
_IREMWEB
<enable>,<ip_addr_lo>[,<ip_addr_hi>][,<apn>[,<apn uname>,<apn passwd>]]
_ISENDFILE
<local dir>,<filename>,<ftp dir>,<ftp server>,<ftp uname>,<ftp passwd>[,<apn>[,<apn
uname>[,<apn passwd>]]]
_IUPDCFG
<filename>
_IUPDFW
<filename>
Parameter Values Meaning
<apn passwd> <apn passwd>Password for the APN.
<apn uname> <apn uname> User name for the APN.
<apn> <apn> APN name.
<enable> 0
1
Disable.
Enable.
<filename> <filename> The name of the file to use, including extension.
<ftp dir> <ftp dir> The name of the directory on the ftp server to use for getting or saving a file.
<ftp passwd> <ftp passwd> Password for the ftp server.