CODEL EnergyTech 100 Series - Program Tree

CODEL
OPS. 141 26
Issue : A
Revision : 1
Date : 14/06/18
Doc i/d : 0141/6
050028
5. Set-up Mode - set operating parameters. The mode can only be
accessed using a security code.
! The outputs of the instrument are unaffected by key operation in
all modes except the set-up mode.
4.3.
Program Tree
Figure 9 illustrates the main program of the instrument. Where an operating
mode is complex, an extra program tree is given in this section.