CODEL EnergyTech 100 Series User Manual

CODEL
OPS. 141 40
Issue : A
Revision : 1
Date : 14/06/18
Doc i/d : 0141/6
050028
Set the days averaging stack to the required value. This is limited from 1 to 30
days in 1-day intervals.
The average values currently held in the four averaging stacks can be reset
using this option. This will erase the current averages that are held in all of the
stacks.
Select either YES or NO using the arrow and enter keys. If YES is selected
confirmation is requested before the averages are reset.
If this option is selected, all data in the averaging stacks is reset and the data
for as much as 30 days will be lost.
4.8.3.
Configure O/P1
The analogue current loop output for output 1 is set up from this mode. Press
the ENTER key while this display is shown, then press the ARROW keys to
step through the available options. Press the ENTER key to enter each option;
change the displayed parameter by using the arrow keys.

CODEL EnergyTech 100 Series Specifications

General

Brand	CODEL
Model	EnergyTech 100 Series
Category	Measuring Instruments
Language	English