CODEL GCEM4000 User Manual

Technical Manual Page 10 CODEL
OPS.080 Issue : C Rev. : Date : 16/7/08 Doc. i/d : 0080/6 Ref. : 080040
3.3. Ancillary/Additional Equipment
The 4000 analyser is rarely supplied alone. It is usually associated with other equipment that makes up an
emission monitoring system. In planning installation, consideration should be given to the requirements of other
equipment by consulting the specific manuals so that the whole system may be installed in the most cost
effective and efficient way. If the complete system has been engineered by CODEL, detailed contract specific
information and schematics will have been provided.
Other equipment commonly provided may be:
- CODEL SmartCEM system (system management, data display, logging and reporting)
- Other CODEL monitors/analysers
- Non-CODEL monitors/analysers
- Normalising measurement - oxygen
3.4. Services
Electrical Power - Power Supply Unit - 110 or 240V AC (switchable)
- 47-62Hz
- 200VA
Compressed Air - @ 5bar
- Dry (to -20°C)
- Clean (better than 10μm)
- Consumption 20 l/min during calibration, 5 l/min continuous

CODEL GCEM4000 Specifications

General

Brand	CODEL
Model	GCEM4000
Category	Measuring Instruments
Language	English