e-mark create marking device Chapter 2 Safety
CODI Standard 1.0 13/60
Operating and Maintenance Manual
Hazard from hot surfaces.
Pay attention when cleaning the print head. Never touch the print head directly.
Possible hazard from substances, slight eye and skin irritation from ink.
Do not direct the print head towards the eyes, face or skin. Do not open the ink
cartridges. Do not swallow! Keep ink cartridge out of the reach of children.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Always return the e-mark create to the docking station to prevent the print head from
drying out and damaging the e-mark create.
Packaging materials (paper, plastic) must be disposed of separately. Dispose of
components of the device in accordance with legislative stipulations. Dispose of
materials separately and recycle as much as possible.
Electrical components of the product must be sent for recycling as waste of electrical
or electronic equipment. Dispose of batteries at collection points in accordance with
legislation.
The electrical components of the product must be sent for recycling as waste of
electrical or electronic equipment.
To Next Page
Loading...