Colop e-mark create - Operating Systems; Initial Operation; Transport and Unpacking

e-mark create marking device Chapter 4 Initial operation
CODI Standard 1.0 21/60
Operating and Maintenance Manual
3.5 Operating systems
The COLOP e-mark create app is available for mobile devices using Android and iOS, as well as for Windows PCs,
and is compatible from the following versions:
- Android 7.0
- iOS 11
- Windows 10
Please always make sure to use the latest software version. There may be issues with previous versions and certain
functions may be limited.
4 INITIAL OPERATION
This chapter explains using the e-mark create for the first time and includes unpacking, visual inspection, assembly,
switching on and performance testing the e-mark create.
4.1 Transport and unpacking
When transporting the product, please note the following points:
NOTICE
Battery contacts are protected against short-circuits with insulating plastic tape. The
plastic tape must be removed before using for the first time (see chapter 4.2).
NOTICE
The ink cartridge is packaged separately. It must be inserted before using for the first
time (see chapter 4.2).
Unpacking
Carefully remove the e-mark create from the packaging. Keep the original packaging for storing or transporting the
e-mark create. Dispose of other packaging materials appropriately. Never let children play with the packaging or with
parts of it, since there is a risk of asphyxiation from small parts or plastic film.