Colop e-mark create - Technical Specifications and Dimensions

e-mark create marking device Chapter 3 Description
CODI Standard 1.0 20/60
Operating and Maintenance Manual
3.4 Technical specifications and dimensions
Technical specifications of the e-mark create
Weight
224.5 g (approx. 450 g incl. packaging)
Dimensions L x W x H
111.2 x 76.5 x 72.7 mm
Rechargeable battery (3 cells, each 3.7 V)
11.1 V Li-Ion with min. 600 mAh
Power consumption while operation with battery
supply
5-6 W
Power consumption while battery is charging
(WIFI activated)
15 V, 400 mA
Power consumption in sleep mode
10-12 mW
WIFI interface
WIFI IEEE 802.11bgn
USB interface
Micro USB
Optimum print speed
4 in/s
Maximum print speed
11 ¾ in/s
Print quality
600 dpi
Protection class
III, Extra low voltage
Mains connection charger
100-240 V, 50/60 Hz
Print head 3-colour (cyan, magenta, yellow)
COLOP 3-colour Ink Cartridge C2P06AE
Storage temperature range
-40 °C to 60 °C
Operating temperature range
15 °C to 35 °C
Non-Operating humidity range
20 to 80 %
Print on absorbent surfaces such as
Plain paper, cardboard, fabric, wood, cork, dry wall, high-
gloss paper, photo paper
Surfaces:
The e-mark create can print directly onto a variety of absorbent flat surfaces including standard paper, cardboard,
fabric, wood, cork, dry wall, high-gloss paper, photo paper and other surfaces with special coatings.