Colop e-mark create - Fig. 54: Remove Screws; Fig. 55: Open the Housing

e-mark create marking deviceChapter 7 Shutdown and disposal
CODI Standard 1.0 59/60
Operating and Maintenance Manual
2. Remove the three screws on the housing
Fig. 54: Remove screws
3. Open the battery housing and remove the battery
Fig. 55: Open the housing
Product materials and parts:
Dispose of the segregated materials and components of the product separately:
 Plastics
 Return battery to collection point with taped contacts
 Send electrical and electronic components away for recycling as electrical scrap, in accordance with the Waste
Electrical & Electronic Equipment Directive (WEEE)
WARNING!
Hazard from rechargeable batteries (short-circuit, overheating, fire).
The poles on lithium rechargeable batteries should be covered with adhesive tape to
prevent short circuits before taking to a collection point. Maximum possible storage, e.g.
in the original packaging and quick deposit in a collection point are recommended.
CAUTION!
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.