Colop e-mark create - Page 3

Table of Figures
Fig. 1: Safety instructions on the underside of the e-mark create .............................................................................. 15
Fig. 2: Package content .............................................................................................................................................. 16
Fig. 3: e-mark create parts.......................................................................................................................................... 17
Fig. 4: Marking device assembly underside ............................................................................................................... 18
Fig. 5: Docking station assembly top section and underside ..................................................................................... 19
Fig. 6: Packaging ........................................................................................................................................................ 22
Fig. 7: Opening and removing the cover .................................................................................................................... 23
Fig. 8: Opening the battery compartment and remove battery ................................................................................... 23
Fig. 9: Battery contact insulating tape ........................................................................................................................ 24
Fig. 10: Opening the sliding panel .............................................................................................................................. 24
Fig. 11: Ink cartridge ................................................................................................................................................... 25
Fig. 12: Insert ink cartridge ......................................................................................................................................... 25
Fig. 13: Close lower flap cover ................................................................................................................................... 25
Fig. 14: Insert battery .................................................................................................................................................. 26
Fig. 15: Example test imprint with SSID and password .............................................................................................. 27
Fig. 16: On/off switch .................................................................................................................................................. 29
Fig. 17: Remove e-mark create from the docking station ........................................................................................... 30
Fig. 18: Printing from left to right ................................................................................................................................ 30
Fig. 19: Printing from right to left ................................................................................................................................ 30
Fig. 20: Multi-line imprint procedure ........................................................................................................................... 31
Fig. 21: Place into docking station .............................................................................................................................. 31
Fig. 22: Light Guide .................................................................................................................................................... 33
Fig. 23: Light Guide directions .................................................................................................................................... 33
Fig. 24: Colour sample released by automatic print head cleaning ........................................................................... 37
Fig. 25: Do not direct towards eyes, face or skin. Light irritation possible ................................................................. 37
Fig. 26: Slide out print head wiper .............................................................................................................................. 38
Fig. 27: Clean print head with wiper ........................................................................................................................... 38
Fig. 28: Clean print head with damp cloth .................................................................................................................. 39
Fig. 29: Software wizard – Welcome page ................................................................................................................. 40
Fig. 30: Software wizard – WIFI information............................................................................................................... 40
Fig. 31: Software wizard – Connection to e-mark create ........................................................................................... 41
Fig. 32: Software wizard – Test imprint ...................................................................................................................... 41
Fig. 33: “My Imprints” page ......................................................................................................................................... 42
Fig. 34: e-mark connect page ..................................................................................................................................... 42
Fig. 35: Example image of WIFI connection in the settings of the mobile device ...................................................... 43
Fig. 36: USB connection ............................................................................................................................................. 44
Fig. 37: Power plug ..................................................................................................................................................... 45
Fig. 38: Charge battery ............................................................................................................................................... 46
Fig. 39: Open and remove cover ................................................................................................................................ 48
Fig. 40: Battery ........................................................................................................................................................... 48
Fig. 41: Open battery compartment ............................................................................................................................ 48
Fig. 42: Opening the sliding panel .............................................................................................................................. 49
Fig. 43: Sliding panel open ......................................................................................................................................... 49
Fig. 44: Pull out ink cartridge ...................................................................................................................................... 50
Fig. 45: Ink cartridge ................................................................................................................................................... 50
Fig. 46: Insert ink cartridge ......................................................................................................................................... 50
Fig. 47: Close lower flap cover ................................................................................................................................... 51