Colop e-mark create - Page 32

e-mark create marking device Chapter 5 Operation
CODI Standard 1.0 32/60
Operating and Maintenance Manual
NOTICE
ALWAYS place the e-mark create in the docking station after use! Otherwise, the ink
cartridge print head dries out.
If the e-mark create is switched on and is not placed in the docking station for one minute, a warning signal sounds
and the Light Guide displays a flashing red warning light. A warning is also displayed in the app interface in online
mode. Return the e-mark create to the docking station. (Fig. 22)
If the e-mark create is switched off, NO warning signal sounds. Even when switched off, the e-mark create must
always be placed in the docking station, otherwise the ink cartridge print head dries out, considerably affecting print
quality or it may be damaged.
NOTICE
Recommendation: Always place the e-mark create in the docking station first and then
switch it off.