Page 58 INSTALLATION & USER'S MANUAL CLITE2
15.8.5.7 Options setup
This menu is used for installing unlock codes that provide access to additional options.
Press “OK” to enter the “Enter Code”-screen.
The code is entered by moving the joystick up and down to select correct character. To move to
next character the joystick is moved to the right. Finish the process by select “OK” by pushing
the button at the right bottom corner of the display
The codes are individual for each operator panel. For obtaining unlock codes please contact
Colorlight for quotation. Colorlight also need the MAC-id of the related control panel to generate
the correct code. Please see 15.6 Info.
The following options are available and can be directly accessed by entering a code:
Display indicator,
Fixed positions, please see 14.1 Fixed positions.
Sweep (auto sweep horizontal), please see 14.2 Sweep.
Surveillance, please see 14.3 Surveillance.
Synchronized control, please see 14.5 Synchronized control.
Language 15.8.2 Language.
To Next Page
Loading...