Page 36 INSTALLATION & USER'S MANUAL CLITE2
Surveillance (optional function) 14.3
Surveillance is an optional function for the Colorlight Searchlight System and can only be
accessed if activated.
This is an advanced sweep, where up to five different points, at any azimuth and elevation can
be set for surveillance.
Setting a new surveillance sweep 14.3.1
To set a new surveillance sweep the number of positions must first be set.
To enter the “Surveillance” submenu, open up the quick start menu and press the bottom left
button.
Navigate down to “Number of Positions to Use” and press “OK”.
To Next Page
Loading...