Page 64 INSTALLATION & USER'S MANUAL CLITE2
(4.2) OP WDT Stats 16.5.2
Displays a counter that keeps track of the number of times the Ethernet communication has
recovered from an OP WDT event.
In case of suspected cable problems with connected operator panels, this counter can be
helpful when troubleshooting.
(4.3) OP WDT Reset 16.5.3
Resets the OP WDT counter.
A confirmation message, “If sure press OK”, is displayed upon entering the menu. Press the
“OK” button at this point to reset the counter and exit the menu. Press the “Down” or “Right”
button to exit the menu without resetting the counter.
To Next Page
Loading...