ComAp IM-NT User Manual

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
135
12.2.3.27 Setpoint: SMTP password
Group
Comms settings
Range [units]
max. 32 characters [-]
Related FW
3.0
Description
Use this setpoint to enter the password for the SMTP server if SMTP
authentification is enabled.
12.2.3.28 Setpoint: SMTP address
Group
Comms settings
Range [units]
max. 32 characters
Related FW
3.0
Description
CAUTION!
Proper setting of SMTP-related setpoints as well as controller mailbox are
essential for sending alerts via e-mails.
This setpoint is used for entering the domain name (e.g.
smtp.yourprovider.com) or IP address (e.g. 74.125.39.109) of the SMTP
server. Please ask your internet provider or IT manager for this information.
NOTE:
You may also use one of free SMTP servers, e.g. smtp.gmail.com. However,
please note that some free SMTP servers may cause delays (in hours..)
when sending e-mails.
NOTE:
If you do not want to send active e-mails, you may leave this setpoint blank,
as well as other setpoints related to SMTP server and e-mail settings.
12.2.3.29 Setpoint: Contr mailbox
Group
Comms settings
Range [units]
max. 32 characters [-]
Related FW
3.0
Description
Enter an existing e-mail address into this setpoint. This address will be
used as sender address in active e-mails that will be sent from the controller.

ComAp IM-NT Specifications

General

Brand	ComAp
Model	IM-NT
Category	Controller
Language	English