InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
15.2.1.5 Binary output: VbusL <>
The output is closed while the busL over/under voltage alarm is present in
the alarm list.
15.2.1.6 Binary output: VbusR <>
The output is closed while the busR over/under voltage alarm is present in
the alarm list.
15.2.1.7 Binary output: fbusL <>
The output is closed while the busL over/under frequency alarm is present in
the alarm list.
15.2.1.8 Binary output: fbusR <>
The output is closed while the busR over/under frequency alarm is present in
the alarm list.
15.2.1.9 Binary output: BusL OK
The output is closed if healthy busL voltage is present. It opens immediately
if busL voltage or frequency gets out of the limits.
15.2.1.10 Binary output: BusR OK
The output is closed if healthy busR voltage is present. It opens immediately
if busR voltage or frequency gets out of the limits.
To Next Page
Loading...
