ComAp InteliMains 210 BTB User Manual

InteliMains 210 Global Guide
173
Setpoint group
Process
Control
Related FW 2.0.0
Range [units] Enabled / Disabled [-]
Default value Disabled Alternative config NO
Step [-]
Comm object 16048 Related applications BTB
Description
Setpoint for adjustment of the direction of synchronization. This setpoint has to be Enable for situations
where the Mains is on the right side and gen-sets are on the left side.
Note: In case the Mains is on the left side, the controller will not try to synchronize.
Synchronization L To Mains
6 back to List of setpoints
Setpoint group
Process
Control
Related FW 2.0.0
Range [units] Enabled / Disabled [-]
Default value Disabled Alternative config NO
Step [-]
Comm object 16049 Related applications BTB
Description
Setpoint for setting the direction of synchronization. This setpoint has to be set to Enable if on both sides are
gen-sets. In case the setpoint is set to enable and even on one side is mains, controller recognizes it and
automatically adjust the direction of synchronization.
Synchronization R To L
6 back to List of setpoints
Setpoint group
Process
Control
Related FW 2.0.0
Range [units] Enabled / Disabled [-]
Default value Disabled Alternative config NO
Step [-]
Comm object 16050 Related applications BTB
Description
Setpoint for setting the direction of synchronization. This setpoint has to be set to Enable if on both sides are
gen-sets. In case the setpoint is set to enable and even on one side is mains, controller recognizes it and
automatically adjust the direction of synchronization.
Synchronization L To R
6 back to List of setpoints

ComAp InteliMains 210 BTB Specifications

General

Brand	ComAp
Model	InteliMains 210 BTB
Category	Controller
Language	English