ComAp InteliMains 210 BTB User Manual

InteliMains 210 Global Guide
292
Setpoint group CM-Ethernet Related FW 2.0.0
Range [units] DISABLED / ENABLED [-]
Default value DISABLED Alternative config NO
Step [-]
Comm object 24336 Related applications MCB, MGCB, BTB
Description
Enable or disable SNMP v1 Agent.
SNMP Agent
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 2.0.0
Range [units] 0..31 characters [-]
Default value public Alternative config NO
Step [-]
Comm object 24335 Related applications MCB, MGCB, BTB
Description
SNMP Community String only for reading.
SNMP RD Community String
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 2.0.0
Range [units] 0..31 characters [-]
Default value private Alternative config NO
Step [-]
Comm object 24334 Related applications MCB, MGCB, BTB
Description
SNMP Community String for writing and reading.
SNMP WR Community String
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 2.0.0
Range [units] Valid IP address [-]
Default value DISABLED Alternative config NO
Step [-]
Comm object 24294 Related applications MCB, MGCB, BTB
Description
IP address 1 for receiving SNMP Traps. Leave this setpoint blank if SNMP traps should not be send.
SNMP Traps IP Address 1
6 back to List of setpoints

ComAp InteliMains 210 BTB Specifications

General

Brand	ComAp
Model	InteliMains 210 BTB
Category	Controller
Language	English